how to install
Handgun Safe
Docking Station

suggested fasteners used to install the Handgun Safe Docking Station onto various surfaces

Included in this page...
Jump to a section click "number" or "go".

1  Docking Station designed to be a DIY installation.

2  How to install the Docking Station.

3  Installing Docking Station mk2 smaller.

4  Installing Docking Station mk3 larger.

5  Fixing holes in the Docking Station not big enough for your selected fastener.

6  Fastener types used to install the Docking Station.

7  Using Acrylic water based glue.

8  Australian manufacturer direct special offer between October 23, 2018 and November 02, 2018 save $$$ off RRP.

9  Other products and/or services you maybe interested in.

10  What to do next.

Some links on this page open in a new window.

1: Docking Station designed to be a DIY installation.

Both the Handgun Safe (mk2 smaller) and Weapon Safe (mk3 larger) Docking Station are designed as a DIY installation.

If you own a drill and screw driver or spanner, depending on the fastener type being used to install the Docking Station, you can install it.

Once installed the Handgun Safe slides into the Docking Station and locked with the supplied high security Abloy PROTEC key.

Hide Away Safe
part way in Docking Station.
Hide Away Safe part way in Docking Station.

Do you require a quotation.

Top

2: How to install the Docking Station.

Due to public liability and general insurance reasons we cannot state exactly how to install either the Handgun Safe (mk2 smaller) or the Weapon Safe (mk3 larger) Docking Station into any surface.

Docking Station mk2 inside.
Docking Station mk2 inside.

But what we can do is list methods both the Handgun Safe (mk2 smaller) and Weapon Safe (mk3 larger) Docking Station has been installed in various locations by purchasers throughout Australia and world wide.

This allows the purchaser to make the final decision how to install their Docking Station.

Please note...

As the Docking Station can be installed to many different surfaces this page covers most known surfaces.

Important Notice Disclaimer

It is the purchaser responsibility to make the final decision how to install their Docking Station.

Top

If you have enough information
to make a decision to place your order

... we also give you ...

15 year
Australian manufacturer guarantee

Save $$$ today
Tuesday October 23, 2018
off the RRP

3: Installing Docking Station mk2 smaller.

The mk2 Docking Station can be installed to almost any flat surface and at any angle, even upside down.

The Docking Station has pre-drilled holes in it and we recommend what ever type of fastener you decide to use to install the Docking Station you place a fastener in the 10 pre-drilled holes to install it, 5 along each side of the mk2 Docking Station.

The following picture shows various fastener types you can use depending on what the Docking Station is being installed to.

Various fixings to install the Docking Station.
Various fixings to install the Docking Station.

Do you require a quotation.

Top

4: Installing Docking Station mk3 larger.

The mk3 Docking Station is made from two mk2 Docking Stations joined together in the center.

When installed correctly the mk3 Docking Station is kept rigid by what it is affixed to eg.

Docking Station mk3 top
Docking Station mk3 top.

We suggest what ever fastener type you decide to use to install the mk3 Docking Station, you place a fastener in the 5 pre-drilled holes on both sides of each mk2 Docking Station that makes up the mk3 Docking Station.

Please note...

The above suggests we recommend placing your chosen fastener type in all 20 pre-drilled holes to install a mk3 Docking Station.

Hide Away Safe
part way into the Docking Station.
Hide Away Safe part way into the Docking Station.

Top

If you have enough information
to make a decision to place your order

... we also give you ...

15 year
Australian manufacturer guarantee

Save $$$ today
Tuesday October 23, 2018
off the RRP

5: Fixing holes in the Docking Station not big enough for your selected fastener.

If the pre-drilled fixing holes in the Docking Station are not large enough for your selected fastener type eg. screws or bolts it is ok to enlarge the holes by using a high speed steel drill, the same diameter as the fastener.

Do you require a quotation.

Top

6: Fastener types used to install the Docking Station.

The following are suggestions about the fastener types you can use to install the Docking Station onto common known surfaces.

Wood including Marine Ply or other Wood composite products.

Type 17 wood tek screws
full thread with hex head drive.
Type 17 wood tek screws full thread with hex head drive.

Steel

Marble - generally under a kitchen bench top.

Brick or Concrete

Please note...

Plastic raw plugs or similar ARE NOT TO BE USED under any circumstance.

Top

If you have enough information
to make a decision to place your order

... we also give you ...

15 year
Australian manufacturer guarantee

Save $$$ today
Tuesday October 23, 2018
off the RRP

7: Using Acrylic water based glue.

It is important to note if you every intend moving the Docking Station to another location we suggest you DO NOT use Acrylic glue.

Using Acrylic glue is for the permanent fixing of a Docking Station.

Acrylic water based glue.
Acrylic water based glue.

Top

8: Australian made Handgun Safe (mk2 smaller) and Weapon Safe (mk3 larger) special offer.

Australian Manufacturer Direct Special Offer
...Theft Proof Security Products...

Today
October 23, 2018

until
November 02, 2018

save $$$ off RRP
for both the mk2 and mk3.

Plus...

free delivery anywhere in Australia

All other countries
we will quote the delivery cost.

Plus...

We post most orders two business days after receiving your full payment unless otherwise stated when placing your order.

Handgun Safe
lid open with foldback handle securing two handguns.
Handgun Safe lid open with foldback handle securing two handguns.

save
$178 off RRP

Weapon Safe securing 4 handguns.
Weapon Safe securing 4 handguns.

save
$188 off RRP

the world's highest security rated
virtually indestructible relocatable Safe

Read our offer Now...

Top

9: Other products and/or services you maybe interested in.

Australian Made
Theft Proof Security Products

Top

If you have enough information
to make a decision to place your order

... we also give you ...

15 year
Australian manufacturer guarantee

Save $$$ today
Tuesday October 23, 2018
off the RRP

10: What to do next.

Top

Site Map

Copyright © 1994 – 2018
Speculator Holdings Pty Ltd
ABN: 78 433 438 794

... designed by ...
Internet Sales
selling products & services
on the Internet since 1994

Last Updated
Tuesday October 23, 2018

... member of ...
Theft Proof Security Products
Australian made high security products